Dimensional Descent

It was as though a whole new world had opened up to Leonel.

Even someone with an ability as analytical as himself had been having issues with the blueprinting process. It wasn't that his mind didn't have enough computational ability, but rather that he simply didn't have enough experience.

Since this was his first creation, it was only made of three parts. Yet, the process of transferring those ideas to their individual blueprints, then visualizing the 2D in 3D while ensuring that all the parameters are within appropriate margins of error was difficult for a newbie like Leonel.

Imagine for a moment that you had to design a screw and the hole it would screw into. From the outside, this seems incredibly simple. However, this isn't the case at all.

The grooves of a screw that allow it to solidly embed itself into the appropriate hole could be measured in millimeters. If the hole is a fraction too big and the screw is a fraction too small, suddenly, the error compounds and you have a useless screw on your hands.

This was the absolute simplest example. What if the parts are more complex than this? What if there's more than just two parts to consider?

Leonel was dealing with three parts currently, but he already had a headache. Ensuring that machine parts work smoothly as one even when they were manufactured separately was probably the bane of all engineers. But now, Leonel felt that he had solved this problem that plagued all beginner Force Crafters.

In the blink of an eye, Leonel had drawn out the blueprints for all three of his parts and laid them flat in the air. Though his arm moved as though he was really 'drawing', this was his dream world. Was there even a need to actually do so? At most, this was a little fanfare.

'So it's like this…'

kicking himself for not realizing he could use

parts of his creations, it was possible to test everything before he even began. Not only this, but he could check the feasibility of his designs without causing irreparable changes to the materials he

blueprints and pulled them apart, causing the design

the other two pieces followed suit, then, along with the closing of Leonel's hands, they came together

here, they would immediately recognize it

and narrow for a gun of its kind. It was just over a foot in length, but barely

Leonel were to reach out and grasp it, it would perfectly form to his hand. However, if one looked closely, it was possible to see many small

could work with bullets, but the main reason Leonel

of Seer's staff. All he had to do was pour his Force into it and it would form and shoot the

Mayan Priest, Leonel was certain that its speed and piercing power would be more than double. However… Those were calculations he had made before he awakened his Light Elemental Force. If he used Light Elemental Force instead of normal Force, the effect would definitely

was whether or not his design could take it and whether the Force Arts he chose

narrowed his eyes, allowing the hovering design

very simple. The nozzle, the hollow

the weight within the handle is pushed up. The moment the energy is released, the weight will shoot back down to its original position. Depending on how much Force I use, the rebound can be either stronger or weaker. Thanks to this, the recoil mitigation

considered to be rudimentary to the extreme. In fact, he knew there were many problems

the current design only accounted for vertical recoil, but not horizontal. Leonel felt that this was an easy fix. If Leonel angled the weights ascent and descent, he